Soil Preparation
Soil should be loosened to a depth of 5-8cm either with a hand spade or rotary tiller. After Soil is reasonably level, broadcast Betta Grower complete fertilizer evenly over the surface and rake in thoroughly to mix with the top 2.5cm of soil to assist with the strong growth of young lawn seedlings. For best results water, rake then roll soil to a level surface removing clods, lumps and pebbles etc. If possible, avoid soft spots. Soil should be moist before sowing.

Sowing
Sow at a rate of approximately 30gms per m2 (or double for quicker, thicker growth) broadcasting the seed mixture evenly over the surface. We recommend half in one direction and then the other in cross direction to get even coverage then lightly rake to a depth of 5mm. Then firm down the surface either with a roller or by walking over it. This helps germination tremendously.

Watering
Light watering during germination to keep the seed moist is essential. The idea is to thoroughly soak the ground at regular intervals so that the seed is never allowed to dry out once the seed has become wet. We recommend that a sprinkler be used to keep the soil moist. Do not continue to apply water once pooling or runoff occurs.

Mowing
When grass is about 5cm high it should be mown and maintained at between 3-5cm in height for the first few months. It is desirable to keep feeding it at regular intervals with Betta Grower complete fertilizer to promote and stimulate growth encouraging root growth and retarding weeds. When in full growth, application of fertilizer is suggested every 6 weeks.

To Renovate an Existing Lawn
Mow (with catcher attached) old lawn as low as possible. With a sharp nail rake, rake the old surface to form grooves. Remove debris. Sow as above, spreading (if desired) sandy loam lightly over the area and then level. The procedure is then the same as for a new lawn.